Offline
en el ZTE Blade v2020 - z9000
Procesador MTK Helio p70 8 núcleos
Nivel de parche de seguridad de Android
5 de marzo del 2021
Mismo proceso
En cuestión de minutos
Log: Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5201
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM8)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM8
Connecting;
Downloading DA;
Initializing;
Rid: 4d3c8d120cfa041fa3b6d82188ed78cc
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6771 [CA00, 00, 6771, 00]
HW_STORAGE_EMMC: 0x44000145 0x32313441 0x6A750138 0xE9C6405C [SIZE=0x1D20400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x131800000 SIZE: 0x1BE98F8000
SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder
Searching data;
Checking data;
NVRAM integrity check passed;
Formatting NVDATA partition now...
Done;
IMEI repaired; Remove battery and cable;
Time needed - 00:00:07
Log file saved to: LOG_24_05_2021_16_11_40.txt
Procesador MTK Helio p70 8 núcleos
Nivel de parche de seguridad de Android
5 de marzo del 2021
Mismo proceso
En cuestión de minutos
Log: Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5201
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM8)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM8
Connecting;
Downloading DA;
Initializing;
Rid: 4d3c8d120cfa041fa3b6d82188ed78cc
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6771 [CA00, 00, 6771, 00]
HW_STORAGE_EMMC: 0x44000145 0x32313441 0x6A750138 0xE9C6405C [SIZE=0x1D20400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x131800000 SIZE: 0x1BE98F8000
SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder
Searching data;
Checking data;
NVRAM integrity check passed;
Formatting NVDATA partition now...
Done;
IMEI repaired; Remove battery and cable;
Time needed - 00:00:07
Log file saved to: LOG_24_05_2021_16_11_40.txt
