🔓Unlock/Liberar unluck note8 atyt B6 bit6 Binary 6

[servergsm]

UNLOCK INSTRUCCIONES:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-N950U
Selected port: COM104 SAMSUNG Mobile USB Serial Port
Software version: 37.0

Checking Login and Password... Listo
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Si
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-N950U
Android version: 9
PDA version: N950USQS6DSG6
CSC version: N950UOYN6DSG6
Versión del telefono: N950USQS6DSG6
Código del Producto: SM-N950UZKAATT
Código de país CSC: USA
Código de Venta CSC: ATT
Phone SN: R38J80WH4HN
IMEI: 358502080000000
HW version: REV1.0
RF cal date: 2017.09.01
Chip name: MSM8998
Módem: MSM8998
Security patch: 2019-07-01
Boot Warranty bit: 0
SIM State: ABSENT
Reiniciando teléfono ... Listo
Waiting ADB device... Listo
Reiniciando teléfono ... Listo
Waiting ADB device... Listo
Waiting for device to become ready... Listo
Initialization zTool... Listo
Running zTool, please wait... Listo
Lectura de datos desde el teléfono ... Listo
Searching Samsung diag port... detectado COM104
Leyendo información del teléfono ... Listo
Lectura de datos desde el teléfono ... Listo
Searching Ramdump interface... COM8 detected
Lectura de datos desde el teléfono ... Listo
Calculando... Listo
Buscando servidor... Listo
Waiting for server answer... Listo
Congelar código: 53142052
NET lock: 41396395
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
Para comprobar bloquea el estado: *#7465625#

Done with Samsung Tool PRO v.37.0

 

[bie]

tengo esta compilacion N950USQU6DSH3



PDA version: N950USQU6DSH3
CSC version: N950UOYN6DSH3
Versión del telefono: N950USQU6DSH3
Código del Producto: SM-N950UZKAATT
...
...
...
Lectura de datos desde el teléfono ... Listo
Searching Ramdump interface... COM99 detected
Lectura de datos desde el teléfono ... Listo
Calculando... error (3)

Done with Samsung Tool PRO v.38.2