🔓Unlock/Liberar Xiaomi Redmi Note 10 Camellia Bootloader Unlock Pandora

[servergsm]

Marca 📱

Xiaomi / Redmi / Poco/OnePlus/Oppo

Modelo 🔖

XİAOMİ redmi note 10 camellia

📱 Android / Sistema operativo

Android

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

🔧Herramienta utilizada

pandora | Pandora Box

Estado del equipo 📋

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

¿Problema resuelto?

si | ✅ Resuelto

desbloquear XİAOMİ redmi note 10 camellia bootloader liberar gesto de arranque con pandora box
​

Selected model: Xiaomi Redmi Note 10 5G (China) (Camellia)
Operation: Unlock bootloader
Software version: 9.25
Work ID: 122800314

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM55 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Install LibUSB... OK
Waiting for device... OK
Open port... OK
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM55 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xE3D8BC26, 0xE21E660B, 0xA2B38FF3, 0xC56D707B
Get Chip ID... [MT6833]
Get SOC ID... [0D2CA13EB6E084D28B2C38A23540B3D31C3BA5A782AF8A375F DFBEF79F540F4B]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): H9HQ15AECMBDAR (A043)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : H9HQ15AECMBDAR
UFS_FWVER : A043
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x1DCB000000 (119,17Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : M2103K19C
Product Name : camellia
Product Device : camellia
Product Board : camellia
Board Platform : mt6833
Build ID : SP1A.210812.016
Build Date : Tue Sep 19 12:19:04 UTC 2023
Display ID : TP1A.220624.014
Security Patch : 2023-09-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : V14.0.6.0****SMIXM
Userdata FS Type : F2FS
MiAcc Find Device : Disabled
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read security partition from phone... OK
Write security partition to phone... OK
Unlock bootloader done!