Xt1671 Motorola Frp

[servergsm]

Welcome to Octoplus FRP Tool v.1.3.7.1******VOL - PW SELEC FACTORY MODE QUE REINICIE Y CONECT USB********



Platform: MOTOROLA
Selected model: XT1671
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone not responding!
Operation was failed!
Performed by 1.3.7.1 Software version.*****************RESET FPR DE NUEVO********


Platform: MOTOROLA
Selected model: XT1671
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8937.gen
Firmware released date: Apr 9 2018
Firmware released time: 08:33:53
Firmware compiled date: Apr 06 2018
Firmware compiled time: 22:00:00
SW version: MPSS.JO.2.0.c1.8-00029-8937_GENNS_PACK-1.124223.1.144364.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:-------- ************NO HACER CASO DE ESTE AVISO A DARLE OK
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging.. ACEPTAR EN LA PANTALLA***************
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (5)
SW version: NPPS25.137-93-12
Date: Wed May 2 06:14:19 CDT 2018
Android version: 7.0
Baseband M8937_22.29.02.56.01R CEDRIC_LATAMDSDS_CUST
Detected phone model: XT1671
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.3.7.1 Software version.