Offline
If this error comes at 0% (stops in Reading RAM data... at 0%)
* Make sure you are NOT using a USB HUB, Cable must be directly connected to PC
* Change USB Cable
* Uninstall USB drivers, and Re-Install again (use USB drivers from samkey.org>Downloads)
* If still not solved > Install on other PC and ask your reseller to shift your License (fingerprint)
* If again not solved > 100% Phone's Hardware (RAM Part/Connector module) is faulty !!!
If this error comes after 40% (stops in Reading RAM data... after 40%)
* Enable 'Deep Calculate' option, and do Calculate SEC again (DO NOT TOUCH ANY OTHER OPTION!!!)
* Make sure you are NOT using a USB HUB, Cable must be directly connected to PC
* Change USB Cable
* Uninstall USB drivers, and Re-Install again (use USB drivers from samkey.org>Downloads)
* If still not solved > Install on other PC and ask your reseller to shift your License (fingerprint)
* If again not solved > 100% Phone's Hardware (RAM Part/Connector module) is faulty !!!
If this error comes after 40% (stops in Reading RAM data... after 40%)
* Enable 'Deep Calculate' option, and do Calculate SEC again (DO NOT TOUCH ANY OTHER OPTION!!!)
