siiiiiii colega claro que si
el proceso es seguro, recueerde que se reinicia varias veces
no desconectar hasta que encienda de manora normal, y nuestra box diga que ha terminado todo
el proceso
Si quedo aqui les dejo el log:
Connecting to server ...OK
Username: oct_TQuxxxx
Authorizing...OK
Checking balance...OK
Your balance: 130 credits.
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 0000000000235D7E
Checking data...OK
Platform: LG MTK
Selected port: COM41
Selected baudrate: 921600
Selected model: K500MM
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM112
Mode: Emergency
Initializing flash...OK
Model ID: LM-K500MM
Platform: mt6765
Android version: 10
SW version: LMK500MMAT-02-V10i-310-160-JUL-16-2020-ARB00+0
LAF Version: 1.1
Product ID: WI18S200619048945
IMEI: 355041-61-098xxxx
Target operator: LAO
Hardware: rev_10
Battery level: 86%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 355041-61-098xxxxx
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk.
Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Reading security area...
Backup saved to "K500MM_35504161098xxxxx_03-11-2020_12-29-20.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: oct_TQu2xxx
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 130 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum!
Performed by 3.0.5.07 Software version.
