Online
quitar el patron/contraseña/pin vamos a abrir NCK AndroidMTK Mobile,seleccionamos el CPU MT6582,presionamos volumen menos y dejamos presionado hasta que termine,si no inicia solamente quitar la bateria,colocarla de nuevo y encender el equipo y zas queda nuestro LG X165G,aqui el LOG:
Exe version: NCKBox AndroidMTK 2.0
Selected model: 0-By CPU MT6582
Action: Reset Pattern
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM11)
Boot mode: Brom
BBCHIP: 6582 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 510001154d53323762
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100513732534D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM34)
[1]locksettings.db erased ok
[1]locksettings.db-wal erased ok
[1]locksettings.db-shm erased ok
[1]password.key erased ok
[1]gesture.key erased ok
If phone remain on logo, repower phone again.
If lock remain, perform 2 times reset without power on phone.
Wait untill phone will start charging.
[0]All done.
Exe version: NCKBox AndroidMTK 2.0
Selected model: 0-By CPU MT6582
Action: Reset Pattern
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM11)
Boot mode: Brom
BBCHIP: 6582 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 510001154d53323762
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100513732534D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM34)
[1]locksettings.db erased ok
[1]locksettings.db-wal erased ok
[1]locksettings.db-shm erased ok
[1]password.key erased ok
[1]gesture.key erased ok
If phone remain on logo, repower phone again.
If lock remain, perform 2 times reset without power on phone.
Wait untill phone will start charging.
[0]All done.
