Offline
ROOT con Eftsu ...saliendo 100%
Model: SM-J730G
Sales Code: DOO
Country Code: DOMINICAN REPUBLIC
Timezone: America/New_York
Android Version: 9 [PPR1.180610.011] [SDK 28]
Build Date: Fri May 15 14:44:38 KST 2020
PDA Version: J730GUBSCCTE2 [may 2020, rev2]
Phone Version: J730GUBSCCTE2 [may 2020, rev2]
CSC Version: J730GUUBCCTE2 [may 2020, rev2]
Board Platform: EXYNOS5
Modem Platform: SHANNON315
Serial Number: RF8K8367QBL
Imei: 357140xxxxxxxxxxx
Imei2: 000000000000000
Battery Status: 3.75V (43%)
Network Type: GSM
SIM Status: ABSENT,ABSENT
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2020-05-01
Preparing...
Checking root access.
The phone is rooted by: 3.19:EFTSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
After installing new firmware, the patchcert process must be repeated.
Successfully finished.
Model: SM-J730G
Sales Code: DOO
Country Code: DOMINICAN REPUBLIC
Timezone: America/New_York
Android Version: 9 [PPR1.180610.011] [SDK 28]
Build Date: Fri May 15 14:44:38 KST 2020
PDA Version: J730GUBSCCTE2 [may 2020, rev2]
Phone Version: J730GUBSCCTE2 [may 2020, rev2]
CSC Version: J730GUUBCCTE2 [may 2020, rev2]
Board Platform: EXYNOS5
Modem Platform: SHANNON315
Serial Number: RF8K8367QBL
Imei: 357140xxxxxxxxxxx
Imei2: 000000000000000
Battery Status: 3.75V (43%)
Network Type: GSM
SIM Status: ABSENT,ABSENT
Multisim Config: DSDS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2020-05-01
Preparing...
Checking root access.
The phone is rooted by: 3.19:EFTSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
After installing new firmware, the patchcert process must be repeated.
Successfully finished.
